Tube Saturation module

Figure 455. Tube Saturation module.

A. Clipping LED B. Tube saturation enable/disable C. Activity indicator D. Input gain E. Drive (level) F. Output gain G. Saturation type

The Tube Saturation module contains the following controls:

Saturation type. Select the desired type of tube saturation:

Type 1. Type 1 provides pure tube emulation.

Type 2. Type 2 is a dual-tube emulation. The second tube applies a special crossover filter in the high end and doesn't process high frequencies. This ensures that sibilant sounds are not distorted or sound metallic. The result is a gentler tube saturation in the higher frequencies.

Clipping LED. Shows if the input signal to the Tube Saturation module is clipping. If there is any distortion in the ProChannel signal chain, the clipping LEDs let you identify where the clipping occurs.

Tube Saturation enable/disable . Enables/disables the Tube Saturation module.

Input gain. Applies a gain adjustment to the pre-processed audio signal. Hold down the SHIFT key to adjust the control with finer resolution.

Drive. Adjust how much of the pre-processed input signal enters into saturation. The valid range is 0% (no saturation) to 100% (very saturated) and the default setting is 0%. Hold down the SHIFT key to adjust the control with finer resolution.

Output gain. Applies a final gain adjustment to the post-processed audio signal. Hold down the SHIFT key to adjust the control with finer resolution.

Tube Saturation . Shows any tube saturation activity. The icon glows when the input signal is being processed.

 

See:

ProChannel

Using ProChannel

ProChannel modules and controls

PC76 U-Type Channel Compressor module

PC4K S-Type Bus Compressor module

QuadCurve Equalizer module

PC2A T-Type Leveling Amplifier

Softube Saturation Knob

Console Emulator module

FX Chain module

Tape Emulator module

REmatrix Solo convolution reverb

Concrete Limiter module

GRIT (saturation) module

MAX (volume maximizer) module

SPACE (reverb/ambience) module

SMOOTHER (de-esser / de-harsher) module

GATER (remove noise) module

DEPTH (chorus / stereo shaping) module

PULSE (tremolo) module

SHAPER (transient control) module