|
CAKEWALK.INI
[Wincake] section
AskSysxAutoSend=n |
non-zero to ask before sysx auto send, dflt=1 |
AlwaysTrackViewSelection=n |
non-zero => sel track from Track View, not current view, dflt=0 |
BaseOctave=n |
starting octave number at MIDI note 0, dflt=0 |
CachePatches=n |
non-zero to enable patch-caching, dflt=1 |
CALFileDir=xx* |
where to find .CAL files, dflt=installdir |
GrooveFileDir=xx |
where to find Groove Quantize files, dflt=installdir |
MaxUndoSteps=n |
max #operations you can undo, dflt=128 |
RewindAtEnd=n |
non-zero to rewind after playing till end of song, dflt=1 |
ShareDrivers=n |
non-zero to share MIDI drivers, dflt=0 |
SysxFileDir=xx* |
where to find sysx load/save bank files, dflt=installdir |
WorkFileDir=xx |
where to find workfiles, dflt=installdir |
WaveFileDir=xx |
where to find wave files, dflt=windowsdir |
TTSSEQ.INI
[Options] section
FlywheelAmount=n* |
SMPTE flywheel time 1/10 sec, dflt=5 |
ChaseDelay=n* |
sync chase delay 1/10 sec, dflt=20 |
MMCPort=n** |
limits MMC commands to a single port, dflt=-1=all |
MMCPreRoll=n** |
MMC pre-locate amount 1/10 sec, dflt=ChaseDelay |
MMCDelayMsecs=n** |
MMC Delay between commands, dflt=100 |
SyncAllowRateTweak=n |
non-zero to track rate when we sync, dflt=1 |
SysxDelayAfterF7=n |
non-zero to pause between each sysx string, dflt=0 |
SysxSendPacketSize=n |
# bytes between sysx tx delays, dflt=1024 |
SysxSendDelayMsecs=n |
# msecs delay between sysx tx bufs, dflt=60 |
SysxReceiveBuffers=n* |
desired # of sysx rx bufs, dflt=128 |
SysxReceiveBuffersSize=n* |
size to alloc each sysx Rx buf, dflt=512 |
ForceNoteOff=n |
non-zero for note-off vel 64 else note-on vel 0, dflt=0 |
RecordLengthDesired=n |
desired record buffer size in kbytes, pwr of 2, dflt=16 |
SendLocalOff=n |
non-zero to set synths to Local Off at startup, dflt=1 |
SendLocalOn=n |
non-zero to set synths to Local On at exit, dflt=0 |
Timebase=n* |
default timebase, dflt=120 |
*=Cakewalk Professional and Pro Audio only
**=Cakewalk Professional 3.01 and Pro Audio only
|